📋 Overview
Technicians can now take a system, asset, or group off an inspection right from the Inspect Point iOS app, without calling the office. Swipe on the item in the inspection list and pick one of two actions:
- Deactivate when the item is gone from the building for good (removed, replaced, or out of service). The item is marked inactive and stops showing up on future inspections.
- Remove from Inspection when the item is still in the building but doesn't belong on this inspection. The item stays active on the building.
✅ Before You Start
-
Feature Enablement — The Deactivate action is not enabled by default. Contact your Customer Success Manager or Inspect Point Support, support@inspectpoint.com to enable this feature.
- The Remove from Inspection action is available automatically in iOS version 10.8.5 or later.
-
App Version — Both actions require Inspect Point iOS version 10.8.5 or later.
- Version 10.8.6 introduces a banner at the top of the systems list to help technicians discover the swipe actions.
-
Supported Items — Both swipe actions are available for top-level systems, assets, and groups only.
- Secondary items, such as devices, valves, and extinguishers, can be deactivated individually but are not included in these top-level swipe actions.
🚫 How to Deactivate an Item
- Starting on the mobile app, tap to start an inspection.
- Swipe left on the system, asset, or group.
- Tap Deactivate.
- Confirm, then enter the reason the item is being deactivated. A reason is required.
- The item shows as inactive in the list.
- Finish the inspection and send the visit to the office as usual.
Additional Information
- Deactivated items show as inactive on the building in the backend with the reason for deactivation.
- Deactivated items are removed for all future inspections.
- Important details and inspection information added prior to deactivation is kept. This includes system/asset details (manufacturers, locations, size, etc.), deficiency history, and past inspection reports.
- The office can reactivate the item(s) or reference previous reports at any time.
To Reactivate an Item in the Field
Deactivated by mistake? Tap the inactive item in the inspection list to reactivate it. The item goes back to active on the building.
➖ How to Remove an Item from This Inspection
- Starting on the mobile app, tap to start an inspection.
- Swipe left on the system, asset, or group.
- Tap Remove from Inspection.
- The item comes off the list right away. No reason is needed.
- Save or send the visit to the office as usual.
Additional Information
- Removed items will no longer appear on the current inspection.
- If that inspection is part of an inspection series, the items will also be removed from all pending and scheduled inspections within that series.
- The items will remain active at the building level as well as any other inspections they are associated with, excluding those in the affected series.
- Removal is available offline.
To Add a Removed Item
Accidentally remove the wrong item? Tap the blue ➕ button in the bottom-right corner and select Add Existing Item.
🖥️ What the Office Sees After the Visit Is Sent
Deactivated items show as inactive on the building in the backend with the reason for deactivation. Deactivated items are removed for all future inspections. Important details and inspection information added prior to deactivation is kept. This includes system/asset details (manufacturers, locations, size, etc.), deficiency history, and past inspection reports. The office can reactivate the item(s) or reference previous reports at any time.
Removed items will no longer appear on the current inspection. If that inspection is part of an inspection series, the items will also be removed from all pending and scheduled inspections within that series. The items will remain active at the building level as well as any other inspections they are associated with, excluding those in the affected series.
⚖️ Deactivate or Remove: Which One to Use
| Deactivate | Remove from Inspection | |
|---|---|---|
| When to use | The item is no longer in service at the building. | The item is still in service but should not be on the current inspection. |
| Impact on building | The item is marked as inactive. | The item remains active. |
| Future inspections | The item is excluded from future inspections. | The items will remain active at the building level and on any other inspections they are associated with, excluding those in the affected series. |
| Reason required | Yes | No |
| Enablement required | Yes (see Feature Enablement in the Before You Start section). | No, available in the 10.8.5 iOS release. |
| Reversible in the field | Yes, tap the inactive item to reactivate it. | Yes, via the Add Existing Item option. |
| Available on external forms | No | Yes |
❓ FAQ
Q: I swipe on an item but don't see Deactivate.
A: Field deactivation isn't turned on for your company yet, or you are trying to deactivate an external form, where only Remove from Inspection is offered. Contact your admin to turn the setting on.
Q: Does deactivating delete anything?
A: No. The item is marked inactive, not deleted. Its history and any answers entered before deactivating stay on the building record.
Q: A technician removed the wrong item. Can we get it back?
A: Yes. All removed items remain active at the building and can be re-added to an inspection at any time. The back office can edit a future inspection to re-add it. Technicians can do so via the ➕ button in the bottom-right corner of the inspection → select Add Existing Item.
Q: Can technicians deactivate individual devices, like a single extinguisher?
A: These swipe actions are for top-level systems, assets, and groups. Secondary items are managed at the individual device-level.
Comments
0 comments
Article is closed for comments.