Can I add hose valves to an inspection in the field?

From the Inspection Detail screen, tap Inspect in the upper right of the screen to start the inspection

Locate and tap the Standpipe and Hose asset

>>> The standpipe asset inspection questions will now appear on the screen

Tap Hose Valves

>>>NOTE: If this is your first time adding hose valves to this building the screen will be blank (same as the photo below). If you have already added hose valves, you will see all previously added hose valves listed on the screen

To add a hose valve, tap the + button in the upper right corner

>>>The hose valves popup box will appear

Enter the location, indicate whether its a PRV, answer the questions, add photos and notes, and tap Save in the upper right corner of the screen when done

Repeat the process outlined above until all hose valves have been added to the building