How to delete an alarm device in the backend

From the building detail screen, locate and click the Alarm Systems tab

>> You will now see the Fire Alarm Group(s) you added when you setup your building

Click Alarm Devices in the System/Group you are looking to update

>> You will now see any alarm devices already added to the building 

Click into the Address field of the alarm device you'd like to remove, and delete the information

Click into the Location field for the alarm device you'd like to remove, and delete the information

Click into the Device Type, Section, and Barcode fields (if applicable) for the alarm device you'd like to remove, and delete the information

Click Save Changes

>> You will be redirected to the Building Detail screen.

Navigate back to the Alarm Systems tab

Click Alarm Devices in the System/Group you just updated

Confirm the device has been deleted

Repeat the delete process above until all identified alarm devices are deleted

>> NOTE: All alarm devices needs to be removed prior to starting an inspection. If alarm device information is removed during an in-progress inspection, the changes will not be visible to the technician.

Need help? Contact our Support Team at support@inspectpoint.com or submit a support ticket through the "Submit a request" link above.